The use of recycled low-density polyethylene films from protective prepreg for the development of nanocomposites with bentonite clay

Prepreg is a pre-impregnated composite fiber where a thermoset polymer matrix material is present. Before being used, these materials are kept at low temperatures and have a low-density polyethylene (LDPE) film for your protection. The increase in the use of structural composites based on prepregs causes an increase in the amount of protective LDPE film. This material is usually discarded or incinerated and can cause great damage to the environment. Thus, the present work aimed to study the feasibility of recycling up to 100% of protective LDPE (rLDPE) to develop blends-based nanocomposites with rLDPE/virgin LDPE (60/40, 70/30, 80/20, 90/10 and 100/0) with the addition of 5 wt% of compatibilizer agent (maleic anhydride grafted LDPE, LDPE-g-MA), and 1 wt% of bentonite (BNT) using a co-rotational twin-screw extruder, followed by hot pressing in a hydropneumatic press and die-cutting. Water absorption test, thermal aging resistance, morphological characterization by scanning electron microscopy, mechanical properties by Izod impact strength and tensile tests, and differential scanning calorimetry were performed. By the results, it was possible to verify the viability of 100% of the recycling of rLDPE. The results showed a good distribution of 1 wt% of BNT in the matrix, better mechanical properties when compared with virgin LDPE. Furthermore, the thermal properties, water absorption test, and thermal aging resistance showed no statistical differences between the samples. These results confirm the effectiveness and the environmental gain in the use of the recycled material.     

Cyclooxygenase Inhibition Alters Proliferative,Migratory, and Invasive Properties of Human Glioblastoma Cells In Vitro

Prostaglandin E₂ (PGE₂) is known to increase glioblastoma (GBM) cell proliferation and migration while cyclooxygenase (COX) inhibition decreases proliferation and migration. The present study investigated the effects of COX inhibitors and PGE₂ receptor antagonists on GBM cell biology. Cells were grown with inhibitors and dose response, viable cell counting, flow cytometry, cell migration, gene expression, Western blotting, and gelatin zymography studies were performed. The stimulatory effects of PGE₂ and the inhibitory effects of ibuprofen (IBP) were confirmed in GBM cells. The EP2 and EP4 receptors were identified as important mediators of the actions of PGE₂ in GBM cells. The concomitant inhibition of EP2 and EP4 caused a significant decrease in cell migration which was not reverted by exogenous PGE₂. In T98G cells exogenous PGE₂ increased latent MMP2 gelatinolytic activity. The inhibition of COX1 or COX2 caused significant alterations in MMP2 expression and gelatinolytic activity in GBM cells. These findings provide further evidence for the importance of PGE₂ signalling through the EP2 and the EP4 receptor in the control of GBM cell biology. They also support the hypothesis that a relationship exists between COX1 and MMP2 in GBM cells which merits further investigation as a novel therapeutic target for drug development.     

Single-phase and binary phase nanogranular ferrites for magnetic hyperthermia application

The study demonstrates the performance of heating efficiency in single-phase and binary phase spinel ferrite nanosystems. Ferrimagnetic cobalt ferrite (CoFe₂O₄) (CFO) and superparamagnetic copper ferrite/copper oxide (CuFe₂O₄/CuO) (CuF) nanosystems of different particle sizes were synthesized through a microwave-assisted coprecipitation method. The heating behavior was observed in range of both field amplitudes (8-24 kA/m at 516 kHz) and frequencies (325-973 kHz at 12 kA/m). The heating efficiency was analyzed and compared by means of particle size, magnetization, effective anisotropy constant, and Néel relaxation mechanism. Indeed, the heating rate was maximized in larger ferrite particles with low effective anisotropy constant. Moreover, though the magnetization and effective anisotropy constant of single-phase CoFe₂O₄ nanoparticles were higher, the binary phase CuFe₂O₄/CuO nanosystems of similar crystallite size (28 nm) exhibited superior heating efficiency (4.21°C/s). For a field amplitude and frequency of 24 kA/m and 516 kHz, the heating rate of CuF and CFO ferrites with different crystallite sizes decreased in the order of 4.21 > 2.14 > 0.58 > 0.52°C/s for 29 nm > 25 nm > 12 nm > 15 nm, respectively. The results emphasize that binary phase ferrite nanoparticles are better thermoseeds than the single-phase ferrites for the magnetic hyperthermia application.     

Facing Losses of Telemetric Signal in Real Time Forecasting of Water Level using Artificial Neural Networks

Water Resources Management - Real-time forecasting plays a valuable role in the early warning system framework by reducing damage. However, signal loss in telemetric monitoring networks tends to...     

Cytotoxicity of fipronil on mice liver cells

In the present study, mice livers were examined following exposure to different doses of fipronil (15, 25, and 50 mg/kg). Histological and histochemical techniques were used to determine the cytotoxic potential of this compound and to assess the damage it caused to livers. Mice were divided into four groups: control group and groups I, II, and III were exposed to 15, 25, and 50 mg/kg fipronil, respectively. Our findings revealed cytological, morphohistological, and histochemical alterations in liver cells of animals from groups I, II, and III compared to group control animals. These changes included Kupffer-cell proliferation, hepatocyte hypertrophy, accumulation and distribution of proteins, polysaccharides, lipids, and vacuoles in the cytoplasm of hepatocytes, and congestion of blood vessels. These phenotypes mainly characterize the following: (a) autophagic processes, (b) steatosis, and (c) cell death by necrosis, which demonstrate the damage caused by fipronil on nontarget organisms in artificial conditions.     

Simultaneous optimization of piezoelectric actuator topology and polarization

This article addresses the problem of piezoelectric actuator design for active structural vibration control. The topology optimization method using the Piezoelectric Material with Penalization and Polarization (PEMAP-P) model is employed in this work to find the optimum actuator layout and polarization profile simultaneously. A coupled finite element model of the structure is derived assuming a two-phase material, and this structural model is written into the state-space representation. The proposed optimization formulation aims to determine the distribution of piezoelectric material which maximizes the controllability for a given vibration mode. The optimization of the layout and poling direction of embedded in-plane piezoelectric actuators are carried out using a Sequential Linear Programming (SLP) algorithm. Numerical examples are presented considering the control of the bending vibration modes for a cantilever and a fixed beam. A Linear-Quadratic Regulator (LQR) is synthesized for each case of controlled structure in order to compare the influence of the polarization profile.     

Poly(lactic acid)/poly(vinyl pyrrolidone) membranes produced by solution blow spinning: Structure,thermal, spectroscopic,and microbial barrier properties

Submicrometric and nanometric poly(lactic acid)/poly(vinyl pyrrolidone) (PLA/PVP) fibrous membranes containing 0, 5, 10, 15, and 20 wt % PVP, with or without 20 wt % Copaiba oil (Copaifera sp.), were produced by solution blow spinning (SBS), using polymer injection rate of 120 μL min^?1, gas pressure of 2.4 kPa, working distance of 20 cm, and collector rotation of 200 rpm. The morphological, thermal, and spectroscopic properties of these membranes were characterized by scanning electron microscopy (SEM), differential scanning calorimetry (DSC), thermogravimetry (TG), and Fourier transform infrared spectroscopy (FTIR). A method for the evaluation of membrane microbial barrier properties based on resazurin colorimetric method was proposed. Results showed that the addition of both PVP and Copaiba oil produced thicker fibers; otherwise, there was no effect on morphology. Thermal analyses (TG and DSC) indicated the immiscible nature of polymer blends produced, also confirmed by the spectroscopic studies. Antimicrobial barrier properties were related to the antimicrobial effect of Copaiba oil, combined with it hydrophobic nature. The hydrophilic nature of PVP favored degradation of fiber mats, impairing barrier property when higher concentrations of PVP were added. Results indicate that produced spun mats can potentially be used in applications such as wound dressing. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017 , 134 , 44802.     

Penetration of resin‐based materials into initial erosion lesion: A confocal microscopic study

The application of resin‐based materials is an alternative of treatment for eroded lesions. Nevertheless, there are no studies about the penetration of these materials into eroded lesion, which might affect its adhesion. Therefore, this study evaluated the penetration of four resin‐based materials, with and without enamel etching. By using an in vitro protocol, types of treatment were studied at five levels (AdheSE^®, Tetric N‐Bond^®, Single Bond 2^®, Helioseal Clear^®, Icon^®) and types of enamel etching in two levels (with and without). Materials were stained with 0.02 mg/mL ethanolic solution of tetramethylrhodamine isothiocyanate. Bovine enamel samples (4 × 4 mm) were immersed in 0.01 M HCl, pH 2.3, for 30 seconds to produce initial eroded lesions. Afterward, the materials were applied on half of sample enamel surface following the manufacturer's instructions. On the other half of sample, the materials were applied without etching the enamel. Materials penetration into the enamel was assessed by Confocal Laser Scanning Microscopy on reflection and fluorescence modes. The penetration depth (PD) was measured using ImageJ software. Data were analyzed by two‐way ANOVA and Tukey test (P < 0.05). Regardless of the material, etched enamel resulted in higher PD than non‐etched (P < 0.05). Icon^® showed the highest PD in enamel followed by Helioseal Clear^® (P < 0.05), with significant difference between them (P < 0.05) and no difference was found among AdheSE^®, Tetric N‐Bond^®, and Single Bond 2^® (P > 0.05). It can be concluded that prior enamel etching increased the materials penetration into eroded enamel and the Icon^®—infiltrant presented highest penetration. Microsc. Res. Tech. 79:72–80, 2016. © 2015 Wiley Periodicals, Inc.     

Statistical methodology for pathogen detection

The main goal of the present study was to discuss the application of the McNemar test to the comparison of proportions in dependent samples. Data were analyzed from studies conducted to verify the suitability of replacing a conventional method with a new one for identifying the presence of Salmonella. It is shown that, in most situations, the McNemar test does not provide all the elements required by the microbiologist to make a final decision and that appropriate functions of the proportions need to be considered. Sample sizes suitable to guarantee a test with a high power in the detection of significant differences regarding the problem studied are obtained by simulation. Examples of functions that are of great value to the microbiologist are presented.